Yancheng Xiangsheng Carbon Fiber Products Co., Ltd. specializing in the production of chopped carbon fiber | carbon fiber powder | chopped carbon fiber | carbon fiber rope | carbon fiber. Carbon fiber due to the unique properties of carbon in the market is also very extensive.

First, the use of carbon fiber as a conductive material

Second, the use of carbon fiber as a refractory material
As carbon and carbon fiber products can be high temperature and have good high temperature strength and corrosion resistance, so a lot of metallurgical furnace lining available carbon masonry, such as the bottom of the iron furnace, hearth and belly furnace, iron alloy furnace and calcium carbide furnace The lined, bottom and side of the aluminum reduction cell. Many precious metals and rare metal smelting crucibles, fused silica glass used in carbonized crucible, are also made of carbonized billet processing. Carbon and carbon fiber products used as refractory materials should generally not be used in an oxidizing atmosphere. Because, without degradation is carbon or carbon fiber in the oxidizing atmosphere at high temperatures quickly ablation.

Third, the use of carbon fiber as a corrosion-resistant structural material
After impregnated with organic resin or inorganic resin carbon fiber electrode, with good corrosion resistance, good thermal conductivity, low permeability, etc., this impregnated carbon fiber, also known as impermeable carbon fiber. It is widely used in the production of various heat exchangers, reaction tanks, condensers, combustion towers, absorption towers, coolers, heaters, filters, pumps and other equipment, widely used in petroleum refining, petrochemicals, hydrometallurgy , Acid-base production, synthetic fiber, paper and other industrial sectors, can save a lot of stainless steel and other metal materials. Opaque carbon fiber production has become an important branch of the carbon industry.
carbon fiber
Fourth, as a wear-resistant and lubricating materials
In addition to carbon and carbon fiber materials with high chemical stability characteristics, but also better lubrication. In the high-speed, high temperature, high pressure conditions, the use of lubricating oil to improve the wear resistance of sliding parts is often impossible. Carbon fiber abrasion resistant materials work in corrosive media at -200 to 2000 degrees Celsius and at very high sliding speeds up to 100 m / s without oil. As a result, many compressors and pumps that deliver corrosive media widely use piston rings, seals, and bearings made of carbon fiber.

Fifth, carbon fiber as high temperature metallurgy and ultra-pure materials used in the production of structural materials
Such as the production of monocrystalline silicon crystal growth crucibles, regional refining containers, brackets, fixtures, induction heaters, etc., are made of high-purity carbon fiber materials processed. Carbon fiber insulation board and base for vacuum smelting, high temperature resistance furnace tube, rods, plates, grilles and other components, but also made of carbon fiber material processing.

Sixth, carbon fiber as a mold, die use
Carbon and carbon fiber materials have low coefficient of thermal expansion and good resistance to cold and heat, so they can be used as molds for glassware and molds for ferrous and non-ferrous metals or rare metals. Castings made of carbon fiber are accurate in size, smooth in surface and can be used directly without machining or as long as they are slightly worked, saving a great deal of metal. Production of hard alloy (such as tungsten carbide) and other powder metallurgy process, usually carbon fiber material processing stamping, sintering boat

Seven, carbon fiber in the atomic energy industry and the military industry
Carbon fiber has been used as a deceleration material in atomic reactors for the first time due to its good neutron deceleration performance. Carbon fiber reactors are now more of a nuclear reactor. Used in atomic reactors