(1) preparation;
(2) concrete surface treatment;
(3) preparation and primer or resin;
(4) Preparation of leveling material at the repair place and irregularities;
(5) the preparation and brushing impregnating resins or paste resins;
(6) carbon with carbon fiber sheet;
(7) surface protection.

Among them, the specific method of bonding carbon fiber sheet as follows:
① carbon fiber cut to size according to the design requirements, the process prescribed by product suppliers formulated binder resin;
② Wipe the surface of the carbon fiber to dust. For when pasting two layers of carbon fiber bottom sides should be wiped clean;
③ wipe clean the carbon fiber should immediately brushing adhesive resin layer should form protrusions having an average thickness of not less than 2mm;
④ coated with adhesive resin carbon fiber stick hand soft reduction need to paste the location in. Along with a rubber roller compacted fibers are uniformly smooth direction, the resin overflow from both sides to ensure the dense void-free. When pasting multiple parallel carbon fiber, the gap between the two plates shall not be less than 5mm;
⑤ required when two carbon fiber paste, paste should be continuous. If you can not immediately paste, then paste it before beginning to deal with the underlying carbon fiber re-do the cleaning work