The process of cutting carbon fiber!

How is the process of cutting carbon fiber, this article tells you!

1. Fiber cutting

The first step in cutting carbon fiber is to cut the fiber. Mechanical or water-jet cutting equipment is usually used to cut long carbon fibers into short fibers of the desired length. The length of the cut staple fiber can be adjusted according to different needs, generally between 1 mm and 50 mm.

2. Fiber screening

The cut staple fibers need to be screened to remove overly long or short fibers. The purpose of screening is to obtain a uniform length of short fibers to improve the effect of subsequent processing. Commonly used screening equipment with vibrating screen, swirl screen and so on.

3. Fiber drying

The cut and screened staple fibers contain a certain amount of water and need to be dried. The purpose of drying is to remove the moisture in the fiber to improve the storage stability of the fiber and the quality of subsequent processing. Commonly used drying equipment are hot air circulation dryer, vacuum drying box and so on

4. Fiber packaging

Dried staple fibers need to be packaged for easy storage and transportation. Common packaging methods are cartons, woven bags and so on. In the packaging process, it is necessary to pay attention to protect the quality and length of the fiber to avoid the re-damage of the fiber.

Yancheng Xiangsheng Carbon Fiber Technology Co., Ltd. Registered trademark "Xiangli", is committed to the research of carbon fiber, aramid fiber and other special fiber composite materials functionality and design diversity, It has developed 16 series products with independent intellectual property rights, such as rotorcraft shell, landing gear, aircraft plant protection spray system, seaplane float, swamp boat, aerodynamic boat, aviation communication helmet, carbon fiber for plastic reinforcement, carbon fiber powder for friction materials, short carbon fiber for braking system, as well as carbon fiber rope, carbon fiber cloth, carbon fiber filament special fiber cutting machine.